vw.cpp

Go to the documentation of this file.

/*
 * @file vw.cpp
 *
 * set engine_type 32
 *
 * @date May 24, 2015
 * @author Andrey Belomutskiy, (c) 2012-2020
 */
 
#include "pch.h"
 
#include "vw.h"
#include "custom_engine.h"
#include "defaults.h"
 
// VW_ABA
// set engine_type 32
void setVwAba() {
    setFrankensoConfiguration();
    engineConfiguration->camInputs[0] = Gpio::E0; // a random unused pin needed for happy HW CI
 
  // default PC1-5 ADC pins conflict with the ethernet module on F767, used on HW CI
    engineConfiguration->tps1_1AdcChannel = EFI_ADC_32;
    engineConfiguration->vbattAdcChannel = EFI_ADC_33;
    engineConfiguration->clt.adcChannel = EFI_ADC_34;
    engineConfiguration->iat.adcChannel = EFI_ADC_35;
    engineConfiguration->afr.hwChannel = EFI_ADC_36;
 
    setWholeTimingTable(20);
    // set cranking_timing_angle 10
    engineConfiguration->crankingTimingAngle = 10;
 
    // set global_trigger_offset_angle 93
    engineConfiguration->globalTriggerAngleOffset = 93;
 
    setCrankOperationMode();
    engineConfiguration->trigger.type = trigger_type_e::TT_TOOTHED_WHEEL_60_2;
 
    //Base engine setting
    setInline4();
    engineConfiguration->displacement = 2.0;
    engineConfiguration->injector.flow = 320; // 30lb/h
    // set algorithm 3
    setAlgorithm(engine_load_mode_e::LM_SPEED_DENSITY);
    engineConfiguration->map.sensor.type = MT_GM_3_BAR;
 
    engineConfiguration->ignitionMode = IM_ONE_COIL;
 
    float mapRange = 110;
 
    setEgoSensor(ES_PLX);
    setFuelTablesLoadBin(20, mapRange);
    setLinearCurve(config->ignitionLoadBins, 20, mapRange);
 
    engineConfiguration->isSdCardEnabled = false;
    engineConfiguration->tpsMin = 740;
    engineConfiguration->tpsMax = 135;
}
 
void setVag_5_cyl() {
  strcpy(engineConfiguration->engineMake, ENGINE_MAKE_VAG);
    engineConfiguration->cylindersCount = 5;
    engineConfiguration->displacement = 2.5;
    engineConfiguration->firingOrder = FO_1_2_4_5_3;
}
 
void setHellen121Vag_vr6_cyl() {
    engineConfiguration->cylindersCount = 6;
    engineConfiguration->firingOrder = FO_1_5_3_6_2_4;
}
 
void setHellen121Vag_v6_cyl() {
    engineConfiguration->cylindersCount = 6;
    engineConfiguration->displacement = 2.7;
 
    engineConfiguration->camInputs[1 * CAMS_PER_BANK] = Gpio::A7; // 87a
 
    engineConfiguration->firingOrder = FO_1_4_3_6_2_5;
}
 
void setHellen121Vag_8_cyl() {
    engineConfiguration->cylindersCount = 8;
    engineConfiguration->displacement = 4.2;
    engineConfiguration->firingOrder = FO_1_5_4_8_6_3_7_2;
}