board_configuration.cpp

Go to the documentation of this file.

/**
 * @file boards/hellen/hellen-112-17/board_configuration.cpp
 *
 * See https://rusefi.com/s/XX
 *
 * @author Andrey Belomutskiy, (c) 2012-2023
 */
 
#include "pch.h"
#include "defaults.h"
#include "hellen_meta.h"
#include "board_overrides.h"
 
static void setInjectorPins() {
    engineConfiguration->injectionPins[0] = Gpio::MM100_INJ1;
    engineConfiguration->injectionPins[1] = Gpio::MM100_INJ2;
    engineConfiguration->injectionPins[2] = Gpio::MM100_INJ3;
    engineConfiguration->injectionPins[3] = Gpio::MM100_INJ4;
}
 
static void setIgnitionPins() {
    engineConfiguration->ignitionPins[0] = Gpio::MM100_IGN1;
    engineConfiguration->ignitionPins[1] = Gpio::MM100_IGN2;
    engineConfiguration->ignitionPins[2] = Gpio::MM100_IGN3;
    engineConfiguration->ignitionPins[3] = Gpio::MM100_IGN4;
}
 
static void setupDefaultSensorInputs() {
    engineConfiguration->vehicleSpeedSensorInputPin = Gpio::MM100_IN_D2;
 
    engineConfiguration->tps1_1AdcChannel = MM100_IN_TPS_ANALOG;
    engineConfiguration->tps1_2AdcChannel = MM100_IN_O2S_ANALOG;
 
    setPPSInputs(MM100_IN_PPS_ANALOG, MM100_IN_AUX2_ANALOG);
 
 
    engineConfiguration->map.sensor.hwChannel = H144_IN_MAP1;
 
    engineConfiguration->clt.adcChannel = MM100_IN_CLT_ANALOG;
 
    engineConfiguration->iat.adcChannel = MM100_IN_IAT_ANALOG;
}
 
#include "hellen_leds_100.cpp"
 
static void hellen112_17_boardConfigOverrides() {
    // rev A needs EN pin but newer revisions would potentially not use it
    setHellenMegaEnPin();
    setHellenVbatt();
 
    hellenMegaSdWithAccelerometer();
    configureHellenCanTerminator();
    setHellenCan();
 
    setDefaultHellenAtPullUps();
 
    engineConfiguration->triggerInputPins[0] = Gpio::MM100_IN_CRANK;
    engineConfiguration->camInputs[0] = Gpio::MM100_IN_D1;
 
    //ETB1
    // PWM pin
    engineConfiguration->etbIo[0].controlPin = Gpio::MM100_OUT_PWM6;
    // DIR pin
    engineConfiguration->etbIo[0].directionPin1 = Gpio::MM100_SPI2_MISO;
    // Disable pin
    engineConfiguration->etbIo[0].disablePin = Gpio::MM100_SPI2_MOSI;
}
 
/**
 * @brief   Board-specific configuration defaults.
 *
 
 *
 
 */
static void hellen112_17_boardDefaultConfiguration() {
    setInjectorPins();
    setIgnitionPins();
 
    // not override since sometimes we have issues?
//  setHellenMMbaro();
 
    engineConfiguration->displayLogicLevelsInEngineSniffer = true;
 
    engineConfiguration->enableSoftwareKnock = true;
 
    engineConfiguration->canTxPin = Gpio::MM100_CAN_TX;
    engineConfiguration->canRxPin = Gpio::MM100_CAN_RX;
 
    engineConfiguration->fuelPumpPin = Gpio::MM100_OUT_PWM5;
//  engineConfiguration->idle.solenoidPin = Gpio::H144_LS_6;
//  engineConfiguration->fanPin = Gpio::H144_OUT_IO12;
    engineConfiguration->mainRelayPin = Gpio::MM100_IGN8;
//  engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO7;
 
    // how come this is not denso 183?!
    setCustomMap(/*lowValue*/ 11.4, /*mapLowValueVoltage*/ 0.5, /*highValue*/ 170.7, 4.8);
 
//  engineConfiguration->brakePedalPin = Gpio::H144_IN_CAM;
//  engineConfiguration->acRelayPin = Gpio::H144_LS_5;
//    engineConfiguration->tachOutputPin = Gpio::H144_OUT_IO10;
    // A/C switch on k-line
 
    // "required" hardware is done - set some reasonable defaults
    setupDefaultSensorInputs();
 
    engineConfiguration->etbFunctions[0] = DC_Throttle1;
 
    // Some sensible defaults for other options
    setCrankOperationMode();
 
    setAlgorithm(engine_load_mode_e::LM_SPEED_DENSITY);
 
    engineConfiguration->injectorCompensationMode = ICM_FixedRailPressure;
 
    setCommonNTCSensorParameters(&engineConfiguration->clt);
    setCommonNTCSensorParameters(&engineConfiguration->iat);
 
    setTPS1Calibration(100, 650);
    //hellenWbo();
}
 
static Gpio OUTPUTS[] = {
    Gpio::MM100_INJ1, // 244 injector output 1
    Gpio::MM100_INJ2, // 242 injector output 2
    Gpio::MM100_INJ3, // 243 injector output 3
    Gpio::MM100_INJ4, // 245 injector output 4
    Gpio::MM100_IGN1, // 256 Coil 1
    Gpio::MM100_IGN2, // 253 Coil 2
    Gpio::MM100_IGN3, // 254 Coil 3
    Gpio::MM100_IGN4, // 255 Coil 4
    Gpio::MM100_INJ6, // 9 235 Low Side Output
    Gpio::MM100_INJ5, // 101 low side 1.5A output
    Gpio::MM100_INJ7, // 102 low side 1.5A output
    Gpio::MM100_IGN8, // 12 115 Main Relay
    Gpio::MM100_OUT_PWM3, // 131 Relay Output
    Gpio::MM100_IGN7, // 140 Relay Output
    Gpio::MM100_OUT_PWM4, // 141 Engine Radiator Fan
    Gpio::MM100_OUT_PWM5, // 142 Fuel Pump Relay
    Gpio::MM100_IGN5, // 151 relay output
    Gpio::MM100_IGN6, // 18 152 relay output
    Gpio::MM100_INJ8, // 246 low side 1.5A output
};
 
int getBoardMetaOutputsCount() {
    return efi::size(OUTPUTS);
}
 
Gpio* getBoardMetaOutputs() {
    return OUTPUTS;
}
 
int getBoardMetaDcOutputsCount() {
    return 1;
}
 
void setup_custom_board_overrides() {
    custom_board_DefaultConfiguration = hellen112_17_boardDefaultConfiguration;
    custom_board_ConfigOverrides = hellen112_17_boardConfigOverrides;
}